Thermal analysis of a Claude system for Liquefaction of Various Gases

Devender Kumar; R. S. Mishra

doi:https://doi.org/10.51976/ijari.111307

Submit Manuscript Login / Register Subscribe

Home Page

Editorial Advisory Board

Mission, Aims & Scope

Current Issue

Thermal analysis of a Claude system for Liquefaction of Various Gases

Devender Kumar, R. S. Mishra

Vol 1 , Issue 1 , January - March 2013 | Pages: 57-61 | Research Paper

https://doi.org/10.51976/ijari.111307

Received: July 01, 2013 | Revised: July 15, 2013 | Accepted: July 22, 2013 | Published Online: August 01, 2013

Author Details ( * ) denotes Corresponding author

1. * Devender Kumar, Department of Mechanical Engineering, Delhi Technological University, New Delhi, Delhi, India (devenderdahiya@in.com)

2. R. S. Mishra, Department of Mechanical Engineering, Delhi Technological University, New Delhi, Delhi, India

From various Cryogenics systems a detailed thermo analysis of Claude cryogenic system for various gases is done. A comprehensive Second law analysis of Claude system is carried out by using various properties variables in system to find out the more efficient statics of system included exergy efficiency of system After a applying numerical computational technique to Claude system it find out the Methane gas is more suitable than any other observed gas and 350 and 500 bar is best compressor pressure per kg of gas, other han this it is noticed from analysis that the inlet pressure is kept between in range of 3 to 5 bar and inlet temperature is kept below for high second law efficiency.

Keywords

Thermodynamics Analysis Lindesystem COP Exergy Efficiency Exergy Destruction

T. J. Kotas, “The Exergy Method of Thermal Plant Analysis”, 1995 Ed.; Krieger Publishing Company: London, UK, 1985
M. Kanoglu, MeldaOzdinc, Carpınlıoglu and MurtazaYıldırım, “Energy and exergy analyses of an experimental open-cycle desiccant cooling system”, Applied Thermal Engineering 24, 2004, 919–932
A. Bejan, “General criterion for rating heat-exchanger performance”, Int. J. Heat Mass Transf, 1978, 21, 655–658
M. Yilmaz, O. N. Sara, S. Karsli, “Performance evaluation criteria for heat exchangers based on Second law analysis”, Exergy Int. J. 2001, 4, 278–294
S. T. Wu, X. F. Yuan, Y. R. Li, L. Xiao, “Exergy transfer effectiveness on heat exchanger for finite pressure drop”, Energy 2006, 32, 2110–2120
R. Agrawal, D. W. Woodward, “Efficient cryogenic nitrogen generators: An exergy analysis, Gas Separation & Purification”, 5 (3), September 1991, Pages 139-150, ISSN 0950-4214.
J. Rizk, M. Nemer, D. Clodic, “A real column design exergy optimization of a cryogenic air separation unit”, Energy, 37(1), January 2012, Pages 417-429, ISSN 0360-5442
GaëlleGosselin, “Thermodynamic study of oxygen-enhanced combustion: analysis of different techniques of oxidant production”, KTH industrial engineering and management, Master of Science Thesis EGI 2012: HT.
Yu. V. Sinyavskii, “Electrocaloric refrigerators: A promising alternative to current low-temperature apparatus”, Chemical and Petroleum Engineering, June 1995, 31(6), pp 295-306, ISSN 1573-8329.
R. L. Cornelissen, G. G. Hirs, “Exergy analysis of cryogenic air separation, Energy Conversion and Management”, 39(16–18), November–December 1998, Pages 1821-1826, ISSN 0196-8904
RecepYumrutaş, Mehmet Kunduz, Mehmet Kanoğlu, “Exergy analysis of vapor compression refrigeration systems”, Exergy, An International Journal, 2(4), 2002, Pages 266-272, ISSN 1164-0235
J. U. Ahamed, R. Saidur, H. H. Masjuki, “A review on exergy analysis of vapor compression refrigeration system”, Renewable and Sustainable Energy Reviews, 15(3), April 2011, Pages 1593-1600, ISSN 1364-0321