Journal Press India^®

Author Details ( * ) denotes Corresponding author

The purpose of the present work is to design and fabricate the high pressure effervescent spray combustion system for the study of high pressure spray effervescent combustion characteristics. In the present work, the high pressure effervescent spray cylindrical combustion chamber or system was developed by producing internal pressure and temperature due to combustion process approximately equal to 32 bar and 800 K respectively. It is found that curved surface thickness and closed end surface thickness of the cylindrical combustion chamber were 7.42 mm and 15.76 mm respectively.

Keywords

Effervescent Combustion; Atomization; High Pressure; Cylindrical Chamber

1. S. D. Sovani, E. Sojka, A. H. Lefebvre, “Effervescent Atomization” progress of Energy and Combustion science,27 (2001) 483-521.


2. M. Nektaria, “Experimental investigation of diesel ignition delay and soot formation in a high temperature pressure cell‟‟, Automotive Engineering International, 110, 2 February 2002


3. J. B. Heywood, “Internal Combustion Engines”, McGraw Hill International, New York, Second Edition, 1988


4. Ganesan, “Internal Combustion Engines”, pp. 421, Tata McGraw Hill International New Delhi, second edition, 1999


5. M. Arai, M. Tabata, H. Hiroyashu, “Disintegration Process and Spray Caracterization of Fuel Jet Injected by a Diesel Nozzle”, SAE paper 840275, SAE Trans., 93, 1984


6. K. Mahadevan, K. Balaveera Reddy., “Design Data Hand Book(in SI and Metric units) For Mechanical Engineers”, CBS Publishers And Distributors, New Delhi, Third Edition,2005


7. E J Hearn, “Mechanics of Materials”, 1, Elsevier, a division of red Elsevier india private limited, New Delhi, 2008