Review of Matrix Converter Modulation Topology (Venturini Method) and Its Application

Charu Tyagi; Shivam Sharma

doi:https://doi.org/10.51976/ijari.221417

Submit Manuscript Login / Register Subscribe

Home Page

Editorial Advisory Board

Mission, Aims & Scope

Current Issue

Review of Matrix Converter Modulation Topology (Venturini Method) and Its Application

Charu Tyagi, Shivam Sharma

Vol 2 , Issue 2 , April - June 2014 | Pages: 119-122 | Research Paper

https://doi.org/10.51976/ijari.221417

Received: April 02, 2014 | Revised: May 10, 2014 | Accepted: May 20, 2014 | Published Online: June 15, 2014

Author Details ( * ) denotes Corresponding author

1. * Charu Tyagi, Department of Electrical Engineering, Subharti University, Meerut, Uttar Pradesh, India (er.shivamsharma14@gmail.com)

2. Shivam Sharma, Department of Electrical Engineering, Subharti University, Meerut, Uttar Pradesh, India

This paper presents an overview of the matrix converter and its modulation techniques with application. Matrix converter is one of the most interesting members of power converter family; provide direct AC-AC conversion. A matrix converter is an ac-ac power frequency converter that received extension research attention due to its single stage power conversion technique, which is an alternate to ac-dc-ac converter.MC (matrix converter) is capable to convert energy from an ac source to ac load without the need of bulky and life- time limited energy storage elements. Here the purpose of most of these modulation methods is to generate sinusoidal current on the input and output sides. These methods are compared on the basis of theoretical complexities and performance.

Keywords

AC-AC Converter; Matrix Converter Modulation Schemes; Venturini Method; Indirect Matrix Converter.

Alesina, M. Venturini, Intrinsic amplitude limits and optimum design of 9-switch direct PWM AC-AC converters, in Proc. PESC, 1988, 2, 1284–1291

D. Casadei, G. Serra, A. Tani, L. Zarri, Matrix converter modulation strategies A new general approach based on space vector representation of the switch state, IEEE Trans. Ind. Electron., 49(2), 370– 381, 2002.

P. Wheeler, J. Rodriguez, J. Clare, L. Empringham, A. Weinstein, Matrix converters A technology review, IEEE Trans. Ind. Electron., 49(2), 276–288, 2002.

D. Casadei, G. Serra, A. Tani, Z. Luca, Matrix converter modulation strategies A new general approach based on space-vector representation of the switch state,” IEEE Trans. Ind. Electron., 49(2), 370– 381, 2002

M. Venturini, A new sine wave in sine wave out, conversion technique which eliminates reactive elements, in Proc. Powercon 7, 1980, E3/1–E3/15.

E. Yamamoto, T. Kume, H. Hara, T. Uchino, J. Kang, H. Krug, Development of matrix converter and its applications in industry, in Proc. 35th IEEE IECON, Porto, Portugal, 2009, 4–12.