Optimization of Machining cost and time in Heavy Machining Operation

Vipin; RS Mishra; Ranganath MS

doi:https://doi.org/10.51976/ijari.231424

Submit Manuscript Login / Register Subscribe

Home Page

Editorial Advisory Board

Mission, Aims & Scope

Current Issue

Optimization of Machining cost and time in Heavy Machining Operation

Vipin , RS Mishra, Ranganath MS

Vol 2 , Issue 3 , July - September 2014 | Pages: 160-164 | Research Paper

https://doi.org/10.51976/ijari.231424

Received: July 25, 2014 | Revised: August 10, 2014 | Accepted: August 20, 2014 | Published Online: September 15, 2014

Author Details ( * ) denotes Corresponding author

1. * Vipin Department of Mechanical Engineering, Delhi Technological University, New Delhi, Delhi, India (vipin2867@yahoo.co.in)

2. RS Mishra, Department of Mechanical Engineering, Delhi Technological University, New Delhi, Delhi, India

3. Ranganath MS, Department of Mechanical Engineering, Delhi Technological University, New Delhi, Delhi, India

Investigation has been done to determine the optimal machining cost and time parameters for multi-pass operations with carbide tool (P-40) on cast steel material. The experiments were carried out on double column heavy duty turning and boring machine and were analyzed. The temperature, cutting force, surface roughness and tool life equations were obtained in terms of speed, feed and depth of cut. The expressions so developed were used to further optimize the numbers of tool passes to minimize the cost and time.

Keywords

Optimization; Machining Cost; Time in Heavy Machining; Machining Operation

W. Bouzid, Cutting parameter optimization to minimize production time in high speed turning, Journal of Materials Processing Technology, 161, 2005, 388–395

G. C. Onwubolu, T. Kumalo, Optimization of multipass turning operations with genetic algorithms, International Journal of Production Research, 39, 2001, 3727-3745.

S. S. Rao, L. Chen, Determination of Optimal Machining Conditions: A Coupled Uncertainty Model, Transactions of the ASME, Journal of Manufacturing Science and Engineering, 122, 2000, 206-214.

S. V. B. Reddy, M. S. Shunmugam, T. T. Narendran, Optimal sub-division of the depth of cut to achieve minimum production cost in multi-pass turning using a genetic algorithm, Journal of Materials Processing Technology, 79, 1998, 101–108.

Vipin, Optimization of tool life for cemented carbide tools using double column heavy vertical boring and turning machines for heavy machining operations of cast steel materials, PhD thesis, Faculty of Technology, University of Delhi, Delhi, India, 2008

Vipin, B. B. Arora, R. S. Mishra, Optimization of machining time at multi-pass turning in Heavy Machining Operation, International Journal of Engineering Studies, 3, 2011, 13-20.

Vipin, B. B. Arora, R. S. Mishra, Optimization of machining cost in Heavy Machining Operation, International Journal of Engineering Research and Technology, 4, 2011, 199-207.

X. Wang, Z. J. Da, A. K. Balaji, I. S. Jawahir, Performance-based optimal selection of cutting tools in multipass turning operations using genetic algorithms, International Journal of Production Research, 40, 2002, 2053-2065.

U. Zuperl, F. Cus, B. Mursec, T. Ploj, A hybrid analytical-neural network approach to the determination of optimal cutting conditions, Journal of Materials Processing Technology, 157–158, 2004, 82–90.