A Review of Using Response Surface Methodology in Friction Stir Welding

Wails Grant Kaunitz

doi:https://doi.org/10.51976/ijari.711916

Submit Manuscript Login / Register Subscribe

Home Page

Editorial Advisory Board

Mission, Aims & Scope

Current Issue

A Review of Using Response Surface Methodology in Friction Stir Welding

Wails Grant Kaunitz

Vol 7 , Issue 1 , January - March 2019 | Pages: 106-110 | Research Paper

https://doi.org/10.51976/ijari.711916

Received: December 10, 2018 | Revised: February 20, 2019 | Accepted: February 28, 2019 | Published Online: March 25, 2019

Author Details ( * ) denotes Corresponding author

1. * Wails Grant Kaunitz, Department of Mechanical Engineering, Sant Longowal Institute of Engineering and Technology Deemed University, Punjab, India (kaunitzwails@gmail.com)

Friction Stir Welding (FSW) is a comparatively new joining process that has exhibited many advantages over traditional arc welding processes, including greatly reducing distortion and eliminating solidification. Friction stir welding used to join high strength joints aluminum pipes. The present work explains review and overview of Response Surface Methodology in Friction stir welding which contain the basic connotation of the process, mechanical properties and Suggested model in FSW process. This paper gives the review of basic concepts of response surface methodology in Friction Stir Welding for alloys on process parameters. It is established that response surface methodology in FSW of alloys is appropriate an increasingly overripe technology with many commercial applications.

Keywords

Friction Stir Welding; Alloy; Response Surface Methodology

CJ Dawes, WM Thomas. Friction Stir Process Welds Aluminum Alloys, Welding Journal, 3,1996, 41–45.

DD Dhancholia, A Sharma, C Vyas. Optimisation of Friction Stir Welding Parameters for AA 6061 and AA 7039 Aluminium Alloys by Response Surface Methodology (RSM), International Journal of Advanced Mechanical Engineering, 4(5),2014.

SP Pawar, MT Shete. Optimization of friction stir welding process parameter using taguchi method and responses surefaces methodology. International Journal of Research in Engineering and Technology, 2(12), 2013.

I Sabry, AMEl-Kassas. New Approach of Aluminum Oxide Addition for Friction Stir Welding, European Journal of Advances in Engineering and Technology, 4(2),2017, 143-152

GElatharasan VS SenthilKumar. An Experimental Analysis and Optimization of Process Parameter on Friction Stir Welding of AA 6061-T6 Aluminum Alloy using RSM, Procedia Engineering, 64, 2013, 1227-1234.

SShanavas, JER Dhas. Parametric optimization of friction stir welding parameters of marine grade aluminium alloy using response surface methodology, Transactions of Nonferrous Metals Society of China, 27(11), 2017, 2334-2344

S Rajakumar, C Muralidharan, V Balasubramanian. Optimisation and sensitivity analysis of friction stir welding process and tool parameters for joining AA1100 aluminium alloy, International Journal of Microstructure and Materials Properties, 6(1-2),2016.

Development of mathematical model to predict the mechanical properties of friction stir welded aluminum pipe, International Journal of Applied Science and Technology, 6(1), 2016.

A Farzadi,M Bahmani, DF Haghshenas. Optimization of Operational Parameters in Friction Stir Welding of AA7075-T6 Aluminum Alloy Using Response Surface Method, Arabian Journal for Science and Engineering, 42(11), 2017.

R Gupta, K Kumar. Multi-Performance Optimization in Friction Stir Welding of Aluminum Alloy Using Response Surface Methodology, Handbook of Research on Predictive Modeling and Optimization Methods in Science and Engineering,2017.

I Sabry, AM El-Kassas. Comparative Study on Different Tool Geometrics in Friction Stirred Aluminum Welds Using Response Surface Methodology, 4th International Conference on Welding and Failure Analysis of Engineering Materials (wafa-2018), 2018, 19-22,

R Palanivel, PK Mathews, N Murugan. Development of mathematical model to predict the mechanical properties of friction stir welded AA6351 aluminum alloy, Journal of Engineering Science and Technology Review, 4(1),2011.

R Palanivel, PK Mathews. Prediction and optimization of process parameter of friction stir welded AA5083¬ H111 aluminum alloy using response surface methodology, Journal of Central South University , 2012

Z Zhang, HW Zhang. 2007 Material behaviours and mechanicalfeatures in friction stir welding process, 2007.

S Muthukumaran, K Pallav, VK Pandey, SK Mukherjee. A study on electromagnetic property during friction stir weld failure, 2006

KS Arora, S Pandey, M Schaper, R Kumar. Effect of process parameters on friction stir welding of aluminium alloy 2219-T87, 2010

K Elangovan, V Balasubramanian.Influences of tool pin profile and welding speed on the formation of friction stir processing zone in AA2219aluminium alloy. Journal of materials processing technology, 200, 2008, 163–175.

ISabry,AM Khourshid, HM Hindawy, A Elkassas. Comparison of RSM and RA with ANN in predicting mechanical properties of friction stir welded aluminum pipes, Engineering and Technology in India, 2(1), 2017.