Journal Press India®

Simulink Modelling of C-Dump Converter Employed in Switched Reluctance Motor

https://doi.org/10.51976/jfsa.412105

Author Details ( * ) denotes Corresponding author

1. * Rajesh Tiwari, Professor, CMR Engineering College, Hyderabad, Telengana, India (drrajeshtiwari20@gmail.com)
2. K. Rama Krishna, Professor, IIMT College of Engineering , Greater Noida, Uttar Pradesh, India (tenaliramak@gmail.com)

Switched reluctance motors are among the finest competitors to induction motors. It is a well-liked choice because of its durability, brevity, straightforward design, and superior torque to mass ratio. Currents in the stator winding of a switching reluctance motor have a direct impact on the torque generated. A large negative voltage must be offered in order to quickly stop the current while it is working in the demagnetizing phase. This research work analyzes the C-dump converter’s design. The C-Dump converter makes it possible for the phase winding to be rapidly demagnetized and magnetised, which prevents the motor from being used in the generating state. Switched reluctance motors demonstrate a variety of converter topologies for adjusting speed, power, and operation. Additionally, it frequently makes use of the energy that has accumulated in the phase winding and can be returned to the source. Some modified C-Dump converter topologies can utilise this stored energy to bypass the motor’s next phase winding.

Keywords

C-Dump Converter; Servo Motor; Controller; DC source; Switched Reluctance Motor; Torque

  1. R. Krishnan, “Switched Reluctance Motor Drives. Modeling, simulation, analysis, design and application” CRC press: 2001.
  2. S. Riyadi and L. H. Pratomo, "Energy Efficient C-Dump Converter with Simple Control Strategy for SRM Drive," 2019 9th International Conference on Power and Energy Systems (ICPES), 2019, pp. 1-5, doi: 10.1109/ICPES47639.2019.9105375.
  3. Ahmet M. Hava, Vladimir Blasko, Thomas a. Lipo “A modified C- Dump Converter for Variable-Reluctance Motor”, IEEE Transaction on Industry Application, , Vol. 28, no.5, pp.1017- 1022, September/ October 1992.
  4. A. R. Haryawan, "Energy Efficient C-Dump Converter with Inductor for Switched Reluctance Motor," 2018 IEEE Student Conference on Research and Development (SCOReD), 2018, pp. 1-5, doi: 10.1109/SCORED.2018.8710794.
  5. F. Faradjizadeh, M.R. Tavakoli, M. Salehnia, E. Afjei, “C-dump Converter for Switched Reluctance Generator”, The Power Electronics, Drives System and Technologies conference (PEDSTC 2014), IEEE, pp. 597-603, Tehran,Iran.
  6. S. Riyadi, "Analysis of C-Dump Converter for SRM Drives," 2018 International Conference on Electrical Engineering and Informatics (ICELTICs), 2018, pp. 179-184, doi: 10.1109/ICELTICS.2018.8548791.
  7. H. Bagherian, M. Asgar, E. Afjei, “A new Converter for Bifilar Winding Switched Reluctance Motor”, 2nd Power Electronics, Drive Systems and Technologies Conference, IEEE Conference 2011, pp. 467-472.
  8. B. Prebin Babu and M. V. Jayan, "A high efficiency novel C-dump topology based converter for SRM," 2017 IEEE International Conference on Power, Control, Signals and Instrumentation Engineering (ICPCSI), 2017, pp. 1170-1175, doi: 10.1109/ICPCSI.2017.8391894.
  9. Iqbal Hussain, M. Ehsani, “Torque  ripple  minimization  in Switched Reluctance Motor drives by PWM current control”, IEEE Transaction on Power Electronics, Vol. 11, no.1, pp 83-88, January 1996.
  10. K. L. B. Setiawan, "Analysis Performance of Capacitor Voltage in C-Dump Converter for SRM Drive," 2018 IEEE Student Conference on Research and Development (SCOReD), 2018, pp. 1-5, doi: 10.1109/SCORED.2018.8711160
  11. Jibin Zou, Kai Liu, Jianhui Hu, Junlong Li, “A Modified C-Dump Converter for BLDC Machine used in Flywheel Energy Storage System”, IEEE Transaction on Magnetics, Vol. 47, no. 10, pp. 4175-4178, October 2011.
  12. G. D. Ardine and S. Riyadi, "C-Dump Converter without Inductor for Switched Reluctance Motor Drive," 2018 IEEE Student Conference on Research and Development (SCOReD), 2018, pp. 1-5, doi: 10.1109/SCORED.2018.8711307.
  13. King-Jet Tseng, Shuyu Cao, Jijiu wang, “A new Hybrid C-dump  and Buck Fronted Converter for Switched Reluctance Motor”, IEEE Transaction on Industrial Electronics, Vol. 47, no.6, pp.1228-1236, December2000.
  14. Krzysztof Tomczewski, Krzysztof Wrobel, “Improved C-dump converter for Switched Reluctance Motor drives”, IET Power Electron 2014, pp.2628-2635.
  15. Omar Ellaban, Haitham Abu-Rub, “Switched Reluctance Motor Converter Topologies: A Review”, International conference on Industrial Technology (ICIT 2014), IEEE, pp. 840-846, Busan, Korea.
  16. Tae-Won Lee, Yong-Ho Yoon, Yuen-Chang Kim, Byoung-Kuk Lee, Chung-Yuen Won, “Control of C-dump converter fed Switched Reluctance Motor on an automotive application” Electric Power System Research 77 (2007), pp. 804-812, Elsevier.
  17. T. J. E. Miller, “Electronic Control of Switched Reluctance Motor”, Nownons Press 2000.
  18. Yadav, A., Chandra, S. (2021). Cascaded H-Bridge Based Multilevel Inverter for Power Quality Issues. In: Kumar, J., Jena, P. (eds) Recent Advances in Power Electronics and Drives. Lecture Notes in Electrical Engineering, vol 707. Springer, Singapore. https://doi.org/10.1007/978-981-15-8586-9_10.
  19. R. D. Zalke and A. G. Thosar, "C-dump converter for switched reluctance motor," 2017 2nd IEEE International Conference on Recent Trends in Electronics, Information & Communication Technology (RTEICT), 2017, pp. 1733-1738, doi: 10.1109/RTEICT.2017.8256896.

 

Abstract Views: 0
PDF Views: 194

By continuing to use this website, you consent to the use of cookies in accordance with our Cookie Policy.