Geopolymer Concrete Materials: An Overview of their Mechanical Behavior

Dr. Prakash Singh; Mr. Amit Agrawal

doi:https://doi.org/10.51976/jfsa.512210

Submit Manuscript Login / Register Subscribe

Home page

Editorial Board Members

Mission, Aims & Scope

Current Issue

Geopolymer Concrete Materials: An Overview of their Mechanical Behavior

Prakash Singh, Amit Agrawal

https://doi.org/10.51976/jfsa.512210

Author Details ( * ) denotes Corresponding author

1. * Prakash Singh, Assistant Professor, Department of Civil Engineering, Dr K. N. Modi University, Newai, Rajasthan, India (solankyprakash8@gmail.com)

2. Amit Agrawal, Senior Engineer, Indrajit Maitra Associated, Delhi, India (amitagrawal15792@gmail.com)

Environmental contamination has emerged as a big issue in our society. When it comes to global pollution, carbon dioxide has a huge role to play. Traditional building methods rely on the use of cement, which produces a significant quantity of CO2. Consequently, a new substance called geopolymer concrete was developed and is now widely utilised in construction as a means of repurposing industrial waste and decreasing CO2 emissions. Many research have used different curing temperatures and materials such as flyash, GGBS, sodium hydroxide, sodium silicate, and superplasticizers and admixtures such as polyproplene and jute fibres. As a result, we can determine the best quantity of material, the best approach, and the best strength that can be produced from the research by evaluating this information.

Keywords

Geopolymer concrete; Carbon dioxide; Fly Ash; Mechanical Behavior; Fibers

Baboo Rai ,L.B.Roy ,Manoj Rajjak “A Statistical Investigation of Different Parameters Influencing Compressive Strength of Fly ash induced Geopolymer Concrete” WILEY fib ,Structral Concrete,2018,pp.1-12 .
Kunal Kupwade-Patil, Md. Sufian Badar, Milap Dhakal and Erez N. Allouche” Evaluation of Geopolymer Concretes at Elevated Temperature” Developments in Strategic Materials and Computational Design IV. The American Ceramic Society,(2014),pp. 79-95
Sama T. Aly, Dima M. Kanaan, Amr S. El-Dieb, and Samir I. Abu-Eishah “Properties of Ceramic Waste Powder-Based Geopolymer Concrete” International Congress on Polymers in Concrete (ICPIC 2018),chapter 54,pp429-435.
Sulaem Musaddiq Laskar, Ruhul Amin Mozumder and Biswajit Roy “Behaviour of Geopolymer Concrete Under Static and Cyclic Loads” ,Advances in Structural Engineering,(2015),pp 1643-1652.
J. T. Gourley, “Geo polymers; opportunities for environmentally friendly construction materials,” Paper presented at the Materials 2003, Conference on Adaptive Materials for a Modern Society, Sydney,(2003).
S. V. Joshi and M. S. Kadu, “Role of Alkaline Activator in Development of Eco-friendly Fly Ash Based Geo Polymer Concrete” International Journal of Environmental Science and Development, Vol. 3, No. 5,( 2012),pp 417-421
Dr. C. Antony JeyaseharDr. M. SalahuddiDr. S.Thirugnanasambandam “Development of Flyash based Geopolymer Concrete Precast Elements” a project report submitted in combination of Government of India Ministry of Environment and Forest and Annamalai University(2013)Tamilnadu.
Mark Reed, Weena Lokuge, Warna Karunasena ,”Fibre-reinforced geopolymer concrete with ambient curing for in situ applications” Springer Science Business Media New York 2014.
Memon FA, Nuruddin MF, Demie S, Shafiq N, “Effect of curing conditions on strength of fly ash-based self- compacting geopolymer concrete”, World Acad Sci Eng Technol 80:860–863(2011).
Daniel L.Y. Kong a, Jay G. Sanjayan “Effect of elevated temperatures on geopolymer paste, mortar and concrete” Cement and Concrete Research 40, (2010),pp 334–339
M M A B Abdullah, M F M Tahir, M A F M A Tajudin, J J Ekaputri, R Bayuaji and N A M Khatim1 “Study on The Geopolymer Concrete Properties reinforced with steel fibre” IOP Conf. Series: Materials Science and Engineering 267 (2017),pp1-7
J.S. Kalyana Rama, N. Reshmi, M.V.N. Sivakumar and A. Vasan, “ Experimental Investigation and Numerical Validation on the Effect of NaOH Concentration on GGBS Based Self-compacting Geopolymer Concrete”, Advances in Structural Engineering Springer India (2015),pp1673-1686
Ana Carolina , Pontifícia,Rio de Janeiro, “Mechanical Properties of Jute fiber reinforced geopolymers” ,Advances in Materials Science for Environmental and Energy Technologies VI: Ceramic , Transactions, Volume 262 (2017),pp 85-96
N. Sharma, P. Sharma, and S. kr Verma, “Influence of Diatomite on the properties of mortar and concrete: A Review,” in IOP Conference Series: Materials Science and Engineering, 2021, vol. 1116, no. 1, p. 12174.
N. Sharma and P. Sharma, “Effect of hydrophobic agent in cement and concrete : A Review,” IOP Conference Series: Materials Science and Engineering, vol. 1116, no. 1, p. 012175, 2021, doi: 10.1088/1757-899x/1116/1/012175.
Role of graphene in biosensor and protective textile against viruses, A Kumar, K Sharma, AR Dixit, Medical hypotheses 144, 110253
Measurement of dispersion and homogeneity of functionalized graphene/CNT hybrid epoxy composite, MK Shukla, K Sharma, SN Applied Sciences 1 (9), 1-7
A. Agrawal, N. Sharma, and P. Sharma, “Designing an economical slow sand filter for households to improve water quality parameters,” Materials Today: Proceedings, vol. 43, no. xxxx, pp. 1582–1586, 2020, doi: 10.1016/j.matpr.2020.09.450.