Journal Press India®

Assessment of the Effects of Welding Parameters on TIG Weld Bead Quality

Vol 7 , Issue 1 , January - June 2024 | Pages: 74-79 | Research Paper  

https://doi.org/10.51976/jfsa.712410


Author Details ( * ) denotes Corresponding author

1. * Dharmendra Kumar Tiwari, Assistant Professor, Department of Mechanical Engineering, IES University, Bhopal, Madhya Pradesh, India (dharmendraies89213@gmail.com)
2. Rohit Srivastava, Assistant Professor, Department of Mechanical Engineering, IES University, Bhopal, Madhya Pradesh, India

In the industrial sector, TIG welding is a common method of combining metals. The strength and integrity of these weld beads are frequently what determine the quality of a building's welds. Understanding and modifying welding parameters is necessary to produce high-quality weld beads because, according to research, the ideal welding current can increase joint hardness up to a point when diminishing returns happen. Overcurrent can cause problems such as material gaps, splashing and workpiece damage, which will ultimately lower the quality and efficiency of the weld. Dye penetration testing is a standard procedure to improve TIG weld bead quality, and microscopic inspection of weld zones aids in assessing the influence of welding parameters on weld quality.

Keywords

HAZ test, TIG welding, Dye penetration test, Hardness test.

  1. Thakur, Y., Kumar, K., Kumar, K.: Influences of TIG welding parameters on tensile and impact behaviour of aluminium alloy joints: a review. IOSR J. Mech. Civ. Eng., Special Issue, AETM’16, 54–58 (2016).
  2. Randhawa, V.J., Suri, N.M.: Effect of a TIG welding process parameters on penetration in mild steel plates. J. Mech. Ind. Eng. 3(2), 27–30 (2013).
  3. Jeyaprakash, N., Haile, A., Arunprasath, M.: The parameters and equipments used in TIG welding: a review. Int. J. Eng. Sci. 4(2), 11–20 (2015).
  4. Singh, G., Bansal, A., Gupta, A.K., Singh, A.: Study the parametric optimization of TIG welding. Int. Res. J. Eng. Technol. 3(5), 412–417 (2016).
  5. Bhavsar, A.N., Patel, V.A.: Influence of process parameters of TIG welding process on mechanical properties of SS304L welded joint. Int. Res. J. Eng. Technol. 3(5), 977–984 (2016).
  6. Gopinath, V., Manojkumar, T., Sirajudeen, I., Yogeshwaran, S., Chandran, V.: Optimization of process parameters in TIG welding of AISI 202 stainless steel using response surface methodology. Int. J. Appl. Eng. Res. 10(13), 11053–11057 (2015).
  7. Vijayan, D., Rao, V.S.: Process parameter optimization in TIG welding of AISI4340 low alloy steel welds by genetic algorithm. IOP Conf. Ser. Mater. Sci. Eng. 90, 012066 (2018).
  8. Singh, P., Singh, V.: Experimental investigation of weld bead hardness of tig welding of grade ss316. Glob. J. Eng. Sci. Res. 1(3), 42–48 (2014).
Abstract Views: 1
PDF Views: 87

Related Article
To Investigate the Weld Bead Hardness at Various Current through TIG Welding
Dr. Dharmendra Kumar Tiwari, Mr. Rajendra Prasad Verma

News/Events

Dept. of MBA, Karnat...

Department of MBA, KLS, Gogte Institute of Technology, Belagavi Org...

Indira School of Bus...

Indira School of Mangement Studies PGDM, Pune Organizing Internatio...

Indira Institute of ...

Indira Institute of Management, Pune Organizing International Confe...

D. Y. Patil Internat...

D. Y. Patil International University, Akurdi-Pune Organizing Nation...

ISBM College of Engi...

ISBM College of Engineering, Pune Organizing International Conferen...

Periyar Maniammai In...

Department of Commerce Periyar Maniammai Institute of Science &...

Institute of Managem...

Vivekanand Education Society's Institute of Management Studies ...

Institute of Managem...

Deccan Education Society Institute of Management Development and Re...

S.B. Patil Institute...

Pimpri Chinchwad Education Trust's S.B. Patil Institute of Mana...

D. Y. Patil IMCAM, A...

D. Y. Patil Institute of Master of Computer Applications & Managem...

By continuing to use this website, you consent to the use of cookies in accordance with our Cookie Policy.