Author Details
( * ) denotes Corresponding author
In this study, with the help of simulation tool ANSYS we tried for a comparative computational fluid dynamics(CFD) simulation of Shell and Tube heat exchangers(STHE) and Helical tube heat exchangers(HTHE). The outcomes are being analyzed, which are cost requirements, pressure drop, thermal efficiency, heat transfer coeffiecient and space requirements. Two heat exchangers were put under equal operating conditions so as to have a fair comparison. In both the situation we have a constant heat transfer surface area of 9.0562 m2, inlet temperatures of 90C in warm fluid and 15C in cold fluid. The result shows that HTHEs give higher heat transfer and thermal efficiency in comparision to STHEs. Particularly, heat transfer coefficient in the HTHE was 42.5584 W/m2 K having 1 kg/s mass flow rate which is higher than the 34.7566 W/m2 K of the STHE. This has been supported with the result that helical coil geometry is able to create more turbulence and secondary flow that facilitate effective heat transfer. The result shows that in comparision to STHEs pressure drop in HTHEs is much higher. This raised resistance to flow can translate to higher energy usage in fluid pumping, and the effectiveness of system is affected. In this study, the high thermal performance of HTHEs points to the possibility of the use of these sources in a situation where a high heat transfer rate is of paramount priority. Generally speaking, as the result are strong for the upcoming studies and to keep practicing thermal engineering, especially in the balancing of the heat transfer and future design of pressure drop in heat exchanger.
Keywords
CFD; STHE; HTHE; Overall heat transfer coefficient; Thermal efficiency; Pressure drop
Abstract Views: 1
PDF Views: 3