Application of Box Behnken Application of Box Behnken Design in Machining of Turning Samples of MMC Design in Machining of Turning Samples of MMC

V. Shukla; A. Maheshwari

doi:https://doi.org/10.51976/ijari.431617

Journal Press India^®

www.journalpressindia.com

Submit Manuscript Login / Register Subscribe

Home Page

Editorial Advisory Board

Mission, Aims & Scope

Current Issue

Application of Box Behnken Application of Box Behnken Design in Machining of Turning Samples of MMC Design in Machining of Turning Samples of MMC

V. Shukla, A. Maheshwari

Vol 4 , Issue 3 , July - September 2016 | Pages: 99-115 | Research Paper

https://doi.org/10.51976/ijari.431617

Received: January 25, 2016 | Revised: February 20, 2016 | Accepted: February 28, 2016 | Published Online: June 15, 2016

Author Details ( * ) denotes Corresponding author

1. * V. Shukla, Department of Mechanical Engineering, IIL, M Academy of Higher Learning, Greater Noida, Uttar Pradesh, India (vib.gla@gmail.com)

2. A. Maheshwari, Department of Mechanical Engineering, IIL, M Academy of Higher Learning, Greater Noida, Uttar Pradesh, India

Fabrication of AA6351/Al2O3 metal matrix composites with different percentage of reinforcement by stirs carting method. Microstructure observations of all fabricated samples were done to observe distribution of reinforcement. Investigations of mechanical properties of all sample effect of turning parameters on dimensional deviation of metal matrix composites.

Keywords

Metal–matrix; Reynolds; Sommer feld number; Couple stress fluid.

Thiagarajan Rajmohan, Kayaroganam Palanikumar, “Application of the central composite design in optimization of machining parameters in drilling hybrid metal matrix composites” ,Measurement 46, 2013, 1470–1481.

S. Naher , D. Brabazon , L. Looney, “Computational and experimental analysis of particulate distribution during Al–SiC MMC fabrication”, Composites: Part A 38, 2007, 719–729.

S.Tzamtzis , N.S. Barekar , N. HariBabu , J. Patel , B.K. Dhindaw , Z. Fan, “Processing of advanced Al/SiC particulate metal matrix composites under intensive shearing – A novel Rheo-process”, Composites: Part A 40, 2009, 144–151.

S.K. Chaudhury, A.K. Singh, C.S. Sivaramakrishnan, S.C. Panigrahi, “Wear and friction behavior of spray formed and stir cast Al–2Mg–11TiO2 composites”, Wear 258, 2005, 759–767.

D. Mandal, B.K. Dutta, S.C. Panigrahi, “Wear properties of copper-coated short steel fiber reinforced stir cast Al–2Mg alloy composites”, Wear 265, 2008, 930–939

M. BakiKaramıs，Fehmi Nair, “Effects of reinforcement particle size in MMCs on extrusion die wear”, Wear 265, 2008, 1741–1750.

T.V.S. Reddy, D.K. Dwivedi, N.K. Jain, “Adhesive wear of stir cast hypereutectic Al–Si–Mg alloy under reciprocating sliding conditions”, Wear 266, 2009, 1–5.

Luca Casamichele, FabrizioQuadrini , Vincenzo Tagliaferri, “Non-destructive evaluation of local mechanical properties of Al die cast large components by means of FIMEC indentation test” , Measurement 40, 2007, 892–897.

M. Emamy, M. Mahta, J. Rasizadeh, “Formation of TiB2 particles during dissolution of TiAl3 in Al–TiB2 metal matrix composite using an in situ technique”, Composites Science and Technology 66, 2006, 1063–1066.

X.J. Wang, K. Wu, W.X. Huang, H.F. Zhang, M.Y. Zheng, D.L. Peng, “Study on fracture behavior of particulate reinforced magnesium matrix composite using in situ SEM”, Composites Science and Technology 67, 2007, 2253–2260.

T.P.D. Rajan, R.M. Pillai, B.C. Pai, K.G. Satyanarayana, P.K. Rohatgi, “Fabrication and characterisation of Al–7Si–0.35Mg/fly ash metal matrix composites processed by different stir casting routes”, Composites Science and Technology 67,2007, 3369–3377.

L. Ceschini, G. Minak, A. Morri, “Forging of the AA2618/20 vol.% Al2O3p composite: Effects on microstructure and tensile properties”, Composites Science and Technology 69, 2009, 1783–1789.

S. Naher, D. Brabazon, L. Looney, “Simulation of the stir casting process”, Journal of Materials Processing Technology 143–144, 2003, 567–571.

S.M. Olhero, J.M.F. Ferreira, “Rheological characterisation of water-based AlN slurries for the tape casting process”, Journal of Materials Processing Technology 169, 2005, 206–213.

S. BalasivanandhaPrabu, L. Karunamoorthy, S. Kathiresan, B. Mohan, “Influence of stirring speed and stirring time on distribution of particles in cast metal matrix composite”, Journal of Materials Processing Technology 171,2006, 268–273.

YucelBirol, “A357 thixoforming feedstock produced by cooling slope casting”, Journal of Materials Processing Technology 186, 2007, 94–101.

K. Mahadevan, K. Raghukandan, B.C. Pai, U.T.S. Pillai, “ Influence of precipitation hardening parameters on the fatigue strength of AA 6061-SiCp composite”, journal of materials processing technology 198, 2008, 241–247.

Mohamed A. Taha, Nahed A. El-Mahallawy, Ahmed M. El-Sabbagh, “Some experimental data on workability of aluminiumparticulate-reinforced metal matrix composites”,journal of materials processing technology 202, 2008,380–385.

T. Sornakumar, A. Senthil Kumar, “Machinability of bronze–alumina composite with tungsten carbide cutting tool insert, journal of materials processing technology 202, 2008, 402–405.

Arda Cetin, Ali Kalkanli, “Effect of solidification rate on spatial distribution of SiC particles in A356 alloy composites”, journal of materials processing technology 205, 2008, 1–8.