Journal Press India^®

Author Details ( * ) denotes Corresponding author

The optimum values of various parameters and their levels were determined for minimum dilution level in SAW process. The element infusion in hard facing was determined by optical emission spectra analysis. This study will help the engineers to select the proper parameters for required weld bead geometry. Also to use various elements and ferro-alloys in proper composition to develop localized alloying on mild steel to reduce wear losses.

Keywords

Hardfacinfacing; Weld Bead Gepmetry; Spectra Analysis; Ferro Alloy.

1. J Antony. Robust Design in new product development process: a neglected methodology in UK manufacturing Organisations, Work Study, 51(2), 2002, 81-84


2. J Antony. Taguchi or Classical design of experiments: a perspective from a practitioner, Sensor Review, 26(3), 2006, 227-230


3. J Antony. Reducing manufacturing process variability using experimental design technique: a case study, Integrated Manufacturing Systems, 10(3), 1999, 162-170


4. B Gulenc, N Kahraman. Wear behaviour of bulldozer rollers welded using a submerged arc welding process, Materials and Design 24, 2003, 537–542


5. B Beidokhti, AH Koukabi, A Dolati. Effect of titanium addition on the microstructure and inclusion formation in submerged arc welded HSLA pipeline steel, Journal of Materials Processing Technology 209, 2009, 4027–4035.


6. B Beidokhti, AH Koukabi, A Dolati. Influences of titanium and manganese on high strength low alloy SAW weld metal properties, Materials Characterization, 60(3), 2009, 225-233


7. KY Benyounis, AH Bettamer, AG Olabi, MSJ Hashmi M.S.J. Prediction the impact strength of spiral-welded pipe joints in submerged arc welding of low carbon steel, In: Proceedings of IMC21, 1–3 September 2004. Limerick; 2004, 200–10.


8. KY Benyounis, AG Olabi. Optimization of different welding processes using statistical and numerical approaches – A reference guide, Advances in Engineering Software 39, 2008, 483–496.


9. RS Chandel, HP Seow, FL Cheong. Effect of increasing deposition rate on the bead geometry of submerged arc welds, Journal of Materials Processing Technology 72, 1997, 124–128


10. Chiang. Taguchi experimental design for manufacturing process optimisation using historical data and a neural network process model, International Journal of Quality & Reliability Management, 22(5), 2005, 485-502


11. DL Ren, FR Xiao, P Tian, X Wang, L Bo. Effects of welding wire composition and welding process on the weld mental toughness of submerged arc welded pipeline steel, International Journal of Minerals, Metallurgy and Materials, 16(1), 2009, 65-70.


12. DV, Kumar D Pratihar, GL Datta, MN Jha, TK Saha, AV Bapat. Optimization of bead geometry in electron beam welding using a Genetic Algorithm, journal of materials processing technology 209, 2009, 1151– 1157


13. V Gunarai, N Murugan. Prediction and optimization of weld bead volume for the submerged arc process – part 1, Weld Journal, AWS, 2000, 286–94.


14. V Gunarai, N Murugan. Prediction and optimization of weld bead volume for the submerged arc process – part 2, Weld Journal, AWS 3, 2000, 31–8.


15. V Gunaraj, N Murugan. Application of response surface methodology for predicting weld bead quality in submerged arc welding of pipes, Journal of Material Process Technology 88, 1999, 266–75.


16. V Gunaraj, N Murugan. Prediction and comparison of the area of the heat-affected zone for the bead-on-plates and bead-on-joint in submerged arc welding of pipes Journal of Mater Process Technology 95, 1999, 1999, 246–61.


17. V Gunaraj, N Murugan. Prediction of heat-affected zone characteristics in submerged arc welding of structural steel pipes. Weld Journal, AWS, 2002, 94–8.


18. V Gunaraj, N Murugan. Prediction and control of weld bead geometry and shape relationships in submerged arc welding of pipes, Journal of Material Process Technology; 168, 2005, 478–87.


19. VK Gupta, RS Parmar. Fractional factorial technique to predict dimensions of the weld bead in automatic submerged arc welding IE (I) J- MC, 1989, 67–75.


20. J Nowacki, P Rybicki. The influence of welding heat input on submerged arc welded duplex steel joints imperfections, Journal of Materials Processing Technology 164–165, 1989, 1082–1088.


21. T Kannan, N Murugan. Effect of flux cored arc welding process parameters on duplex stainless steel clad quality, Journal of Material Process Technology 176, 2006, 230–9.


22. ME Khallaf MA Ibrahim, NA EI-Mahallawy, MA Taha. On crack susceptibility in the submerged arc welding of medium-carbon steel plates, Journal of Materials Processing Technology 68, 1997, 43- 49


23. IS Kim, JS Son, CE Park, CW Lee, YKDV Prasad. A study on prediction of bead height in robotic arc welding using a neural network, Journal of Material Process Technology; 130–131, 2002, 229–34.


24. KP Kolhe, CK Datta. Prediction of microstructure and mechanical properties of multipass SAW, Journal of materials processing technology 197, 2008, 241–249.


25. A Kumar, J Motwani, L Otero. An application of Taguchi’s robust experimental design to improve service performance, International Journal of Quality & Reliability Management, 13(4), 1996, 85- 98


26. MK Kanti, SP Rao. Prediction of bead geometry in pulsed GMA welding using back propagation neural network, journal of materials processing technology 200, 2008, 300–305


27. NA MarcPherson, K Chi, TN Baker. Submerged arc welding of stainless steel and the challange from the laser welding process, Journal of material processing technology 134, 2003, 174-179.


28. KC Mills, BJ Keene. Physicochemical properties of molten CaF2 based slag, International .Metals. Review, 1, 1989, 21–69.


29. N Murugan, RS Parmar. Effect of welding conditions on microstructure and properties of tupe 316L stainless steel submerged arc welding cladding, Weld Journal, AWS 97, 76(5), 1997, 210–20,


30. N Murugan, RS Parmar, SK Sud. Effect of submerged arc welding process variables on dilution and bead geometry in single wire surfacing, Journal of Material Process Technology; 37, 1993, 767–80.


31. LK Pan, LK Wang, CC Hsiso, KC Ho. Optimization of Nd-YAG laser welding onto magnesium alloy via Taguchi analysis, Journal of Optical and Laser Technology, 37, 2004, 33–42.


32. PJ Ross. Taguchi Techniques For Quality Engineering; Second Edition; Tata McGraw Hill Edition